Extruded Wire Management Trough

The Extruded Wire Management Trough is available on all C base designs. The trough is constructed of extruded aluminum and is fastened to the base or can be attached to the underside of the table top with the use of brackets. Troughs are standard 3” shorter than table length. Troughs are standard with a 1.5”x 3.5” wire pass-through placed 3.5” from each end to allow for entry and exit of wiring. Available to fit 42”– 72” tops, sized to fit all Spec electrical components, and shaped to allow easy hand access. Finished in black textured as standard.


CEWT
Extruded Wire Management Trough
(where not included in price)
To fit 42” - 72” tops

 


The perforated door is available to cover the upper portion of the Extruded Wire Management Trough. The door opens and closes to allow easy access to electrical components. The door is fastened to the Extruded Wire Management Trough with an extruded aluminum spline, and opens and closes with a spring steel tension latch. The door is constructed of 18 gauge perforated metal and is 3” shorter than the table. Finished in black textured as standard.


CEPD
Perforated door for Extruded Wire Management Trough
To fit 42” - 72” troughs

 


The snap on PVC Wire Manager snaps neatly in place inside or under the Extruded Wire Management Trough. There are two inside channels and two channels under the trough. All channels run the entire length of the trough. Standard in 12” lengths in matte black.


CESWN
PVC snap-to-trough PVC wire manager
for Extruded Wire Management Trough
12” lengths

 


The PVC base wire management extrusion snaps to the table base column to conceal and manage unsightly wires. Standard in 13” lengths and matte black finish. Other lengths may be available, please contact the factory.

 

CWMT
PVC snap to leg
wire manager

VELCRO WIRE
MANAGERS
Affix to underside
of table

WIREMGR
24” PVC
under table
wire manager

 
 


End caps snap into the end of the wire management trough to fully enclose it.
Specify right or left when seated at the table.


 

CECAP
End cap for Extruded
Wire Management Troughs.
Specify left or right
when seated

CET
Extruded Trough Joiner.
To join Extruded Wire
Management Troughs

CCET
Extruded Corner Trough Joiner.
To join corners of Extruded
Wire Management Troughs



For any additional help with table accessories requirements,
please contact Spec Customer Service.

(p) 416.246.5550
(f) 416.246.5549
(Toll Free) 1.888.761.7732
specit@specfurniture.com